跳到步骤＃7
由 Robert Boyd — 编辑
编辑已通过 由 Robert Boyd
- 之前
- 之后
- 不变
步骤行
| [title] Pry up the logic board shield | |
| [* black] Insert the ends of a pair of tweezers into the gaps under the crimps of the logic board shield on the upper left corner. | |
| [* icon_caution] Take care not to puncture or bend the battery with your tool—a punctured or bent battery may leak dangerous chemicals or cause a thermal event. | |
| [* black] Pry the logic board shield up. | |
| - | [* icon_caution] Use the screw boss |
| + | [* icon_caution] Use the screw boss to pry on to avoid damaging the press connectors. |