跳到步骤＃7
由 Stefan Countryman — 编辑
编辑已通过 由 Stefan Countryman
- 之前
- 之后
- 不变
步骤行
| + | [* black] Remove the following screws securing the fan assembly cover to the rest of the assembly: |
|---|---|
| + | [* red] One 5.0 mm T5 Torx screw. |
| + | [* icon_note] This screw holds the upper case, main fan assembly, and fan assembly together, and so must be removed. |
| + | [* blue] 3 Phillips #000 screws. |
| + | [* icon_note] The bottom right screw is just under the I/O board cable, and will be visible after it has been lifted out of the way. |
图片1
没有之前的图片
已添加