跳到步骤＃2
由 tayola — 编辑
编辑已通过 由 Alex Diaz-Kokaisl
- 之前
- 之后
- 不变
步骤行
| [title] Remove Back Cover | |
| [* black] Heat up the back cover with a heat gun | |
| - | [* |
| - | [* |
| - | [* |
| + | [* red] Slide a thin plastic tool between the back cover and mid frame to work the adhesive loose. |
| + | [* red] Work around the whole of the frame to release the back cover. |
| + | [* icon_caution] Be careful when using the opening pick on the right side, as the WLAN antenna cable is close to the edge of the frame and can be damaged easily. |