跳到步骤＃12
由 Gina Kittleson — 编辑
编辑已通过 由 Gina Kittleson
- 之前
- 之后
- 不变
步骤行
| [title] Attach the Wires from the 6-pin Connector to the Board | |
| - | [* violet] Attach the blue, green, and brown wires from the 6-pin connector to the board. |
| + | [* violet] Attach the blue, green, and brown wires from the 6-pin connector to the board. These wires have been fed through the box previously and are heat shrink wrapped. |
| [* green] Screw the green wire into the topmost terminal on the top connector. | |
| [* light_blue] Screw the blue wire into the terminal directly below the green wire | |
| [* orange] Screw the brown wire into the terminal directly below the black wire on the top connector. |