跳到步骤＃2
由 Dominik Schnabelrauch — 编辑
编辑已通过 由 Dominik Schnabelrauch
- 之前
- 之后
- 不变
步骤行
| [title] Free the fingerprint sensor | |
| - | [* black] Use a pair of tweezers to carefully lift the upper end of the fingerprint rubber gasket off the plastic pin on the right edge of the back cover. |
| + | [* black] Use tweezers to lift the fingerprint sensor rubber gasket off of the top plastic pin. |
| + | [* icon_caution] Take care to not scratch or yank the fingerprint sensor ribbon cable or pierce the fingerprint senor rubber gasket while removing it. |