跳到步骤＃3
由 Philip Le Riche — 编辑
编辑已通过 由 Philip Le Riche
- 之前
- 之后
- 不变
步骤行
| [title] Take aim! | |
| [* red] Take a look at your hard disk. From the lid, you should be able to make out the outline of where the disk is. | |
| - | [* black] If in doubt, on the botton of the disk you should be |
| + | [* black] If in doubt, on the botton of the disk you should be able to see the motor, which directly drives the disk spindle. |
| [* orange] Below the disk is the read/write head actuator spindle. | |
| - | [* yellow] Note a point roughly half way |
| + | [* yellow] Note a point roughly half to three quarters of the way from the centre of the disk and its circumference. This is where you will be doing the damage! |