跳到步骤＃1
由 Walter Galan — 编辑
编辑已通过 由 Walter Galan
- 之前
- 之后
- 不变
步骤行
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] You will be using an iOpener to transfer heat to the adhesive securing the home button assembly to the front glass panel assembly. |
| + | [* black] Reheat the iOpener in the microwave for one minute on the highest power setting. |
| + | [* black] Lay the iOpener flat on the front side, near the bottom edge of the front glass panel assembly, smoothing it out so that there is good contact between the surface of the front glass panel assembly and the iOpener. |
| + | [* black] Let the bag sit on the front glass panel assembly for approximately 90 seconds before attempting to open the front panel. |