跳到步骤＃1
由 Carsten Frauenheim — 编辑
编辑已通过 由 Carsten Frauenheim
- 之前
- 之后
- 不变
步骤行
| [title] Surface Preparation | |
| [* black] Keep track of the approximate location of the old battery adhesive. It may be helpful to take a quick photo to reference later. | |
| - | [* black] Begin by removing all of the old adhesive and residue from the adhesion surfaces in the battery |
| + | [* black] Begin by removing all of the old adhesive and residue from the adhesion surfaces in the battery well. |
| [* icon_note] You can pull the adhesive off with tweezers or your fingers, [https://d3nevzfk7ii3be.cloudfront.net/igi/omScJRSckUhIpVcT.huge|roll it up on the tip of a spudger|new_window=true] with a roll-and-pull motion, or scrape it off with the flat end of a spudger. |