跳到步骤＃1
由 Carsten Frauenheim — 编辑
编辑已通过 由 Carsten Frauenheim
- 之前
- 之后
- 不变
步骤行
| + | [title] Surface Preparation |
|---|---|
| + | [* black] Begin by removing all of the old adhesive and residue from the adhesion surfaces in the battery basin. |
| + | [* icon_note] You can pull the adhesive off with tweezers or your fingers, [https://d3nevzfk7ii3be.cloudfront.net/igi/omScJRSckUhIpVcT.huge|roll it up on the tip of a spudger|new_window=true] with a roll-and-pull motion, or scrape it off with the flat end of a spudger. |
| + | [* black] After removing most of the adhesive, scrape with the tip of a spudger to get small bits of adhesive out of tight spaces. |
图片1
没有之前的图片
已添加