跳到步骤＃5
由 Vikshay Vuthavadoo — 编辑
编辑已通过 由 Vikshay Vuthavadoo
- 之前
- 之后
- 不变
步骤行
| [* black] Install the new ram stick in the same position that the previous one was it. | |
| - | [* icon_caution] There is a notch at the bottom of the stick, please make sure to align that with the one that is located on the motherboard port and you would need to place the stick there and then apply some pressure for the prongs on the side to clip in the ram stick and once you hear a click, it means the ram has been installed successfully. |
| + | [* icon_caution] There is a notch at the bottom of the stick, please make sure to align that with the notch that is located on the motherboard port to avoid damage to the board or the RAM. |
| + | [* black] Place the new module in the motherboard port and then apply some pressure for the prongs on the side to clip in the ram stick. |
| + | [* black] After the RAM module clicks into place, it is fully installed. |