跳到步骤＃3
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* black] Open the case by unscrewing the plastic see-through side panel using a Philips screwdriver or unscrew with by hand. |
|---|---|
| - | [* black] The screw head diameter is 12mm, and the M4 Thread is 7mm long. |
| - | [* black] There is one screw on each corner of the square panel. |
| + | [* black] Unscrew the four 7 mm screws from the corners of the panel using a Phillips screwdriver. |
| [* black] Lift the plastic side panel carefully and put it to the side. | |
| - | [* |
| + | [* icon_note] This will expose the main motherboard with all of its components such as the CPU, RAM, graphics card, storage drive, power supply, and cooling fans. |