跳到步骤＃2
由 Ian Jenkins — 编辑
编辑已通过 由 Ian Jenkins
- 之前
- 之后
- 不变
步骤行
| [* red] Gently lift up the SD chip's black protective film. | |
| - | [* orange] Using a |
| - | [* |
| + | [* orange] Using a Philips #1 screwdriver remove the 1.3 mm Phillips #1 screw. |
| + | [* black] Unplug the SD chip from the assembly and set the SD chip aside. |