跳到步骤＃1
由 Kristen Gismondi — 编辑
编辑已通过 由 Kristen Gismondi
- 之前
- 之后
- 不变
步骤行
| - | [* red] Use the Phillips #00 screwdriver to remove the two 1mm screw holding in the network card. |
|---|---|
| - | [* black] Remove the metal piece holding in the network card. |
| - | [* black] Disconnect the 2 cable connectors from the network card. If the cables are stuck, gently wiggle them until they disconnect. |
| + | [* red] Use the Phillips #00 screwdriver to remove the two 1mm screws holding in the daughterboard. |
| + | [* black] Remove the metal piece holding in the daughterboard. |
| + | [* black] Disconnect the two cable connectors from the daughterboard. |
| + | [* black] If the cables are stuck, gently wiggle them until they disconnect. |