跳转到主内容

跳到步骤#6

Andrew Optimus Goldheart编辑

编辑已通过 由 Andrew Optimus Goldheart

之前
之后
不变

步骤行

-[* icon_caution] Insert the plastic iPod opener to release the green chip from the phone. Be careful to not damage the chip.
-[* black] Disconnect the green chip from the phone by separating the male/female contact point (denoted by the pink square).
-[* black] From this point, you are able to replace the screen by attaching the new screen to the phone at the male/female connection point. You could also clean the display screen or the protective glass cover.
+[* black] Use a plastic opening tool to pry the LCD circuit board up and out of the phone.
+[* icon_caution] Be careful not to damage the circuit board.
+[* icon_note] Flip the display up and over to expose its ribbon cable connector.