跳到步骤＃2
由 jake vandervaate — 编辑
编辑已通过 由 jake vandervaate
- 之前
- 之后
- 不变
步骤行
| - | [* black] Remove the casing located |
|---|---|
| + | [* black] Remove the casing located next to the battery. |
| [* red] Using a #0 Phillips Screwdriver, remove the two 4 mm screws. | |
| - | [* black] Use the |
| + | [* black] Use the precision tweezers to disconnect the white and black wire from the device. |
| [* black] Remove the thin black wire from the device. |