跳到步骤＃26
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Adding Standoffs and Battery to Enclosure | |
| [* black] Obtain a foam-wrapped battery from the previous step, and 8 standoffs | |
| [* yellow] Screw the standoffs together as shown, to make four 3-inch long standoffs | |
| [* green] Screw the standoffs into the enclosure, then place the battery vertically in-between the standoffs | |
| + | [* black] Make sure the sensor wires and desiccant cartridge are secured inside the box. |
| [* icon_caution] Make sure the battery is positioned so that its wires are on the sensor's side of the enclosure |