跳到步骤＃26
由 Ian Thompson — 编辑
编辑已通过 由 TimedIn
- 之前
- 之后
- 不变
步骤行
| + | [title] Adding Standoffs and Battery to Enclosure |
|---|---|
| + | [* black] Obtain a foam-wrapped battery from the previous step, and 8 standoffs |
| + | [* yellow] Screw the standoffs together as shown, to make four 3-inch long standoffs |
| + | [* green] Screw the standoffs into the enclosure, then place the battery vertically in-between the standoffs |
| + | [* icon_caution] Make sure the battery is positioned so that its wires are on the sensor's side of the enclosure |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加