跳到这一步
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
步骤行
| [title] Terminal Block #4 continued | |
| [* red] Screw in the red power wire from the pressure transducer into the second slot(VOUT) as shown | |
| - | [* orange] Screw in the brown wire from the soil moisture sensor in the first slot( VOUT-2) |
| + | [* orange] Screw in the brown power wire from the soil moisture sensor in the first slot( VOUT-2) |
| [* yellow] Screw the other end of the 6-inch black wire into the third slot(GND) as shown |