跳到这一步
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Stripping the Three Free Wires | |
| [* red] There may not be wire strippers that work for thinner wires, so you can solder off the plastic coating on the outside of the wires as a way of stripping them. | |
| - | [* orange] Peel away the excess plastic so the ends look clean, with about a 1/2 an inch of each end of each of the three wires exposed(the black wire is shown as an example; the same should be done to the red and white wires) |
| + | [* orange] Peel away the excess plastic so the ends look clean, with about a 1/2 an inch of each end of each of the three wires exposed(the black wire is shown as an example; the same should be done to the red and white wires). |