跳到这一步
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Obtaining Wires to Lengthen Pressure Transducer | |
| [* red] Cut 32 inches of grey 22-gauge 4 conductor stranded wire. (This one has red, white, black, and green wires inside). | |
| + | [* icon_note] If you are not making an adjustable GI node, this only needs to be about 10 inches! |
| [* orange] Use wire strippers to take off about 2 inches of the grey outer cable to make it easier to pull out the red wire, black wire, and white wire. The rest can we recycled. |