跳到这一步
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
步骤行
| [title] Obtaining Wires to Lengthen Pressure Transducer | |
| [* red] Obtain the 22-gauge grey wire and cut about 32 inches of it | |
| [* orange] Use wire strippers to take off about 2 inches of the grey outer cable to make it easier to pull out a red wire, a black wire, and a white wire. The rest aren't needed. | |
| - | [* yellow] Use wire strippers to strip about a 1/2 an inch off of each end of each of the three wires(the black wire is shown as an example; the same should be done to the other two wires) |