跳到这一步
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Coating the Pipes with Lubricant | |
| - | [* red] Obtain the pipe lubricant |
| - | [* orange] Use a paper towel or rag to coat the outside of the 1.5 |
| - | [* yellow] Coat the inside of the 2- |
| - | [* icon_reminder] Make sure to wash your hands after handling pipe lubricant |
| + | [* red] Obtain the pipe lubricant. |
| + | [* orange] Use a paper towel or rag to coat the outside of the 1.5-inch pipe in a light layer of the lubricant. |
| + | [* yellow] Coat the inside of the 2-inch pipe only in the section with the two long, lengthwise slits(as this is the section the 1.5-inch pipe will fit into). |
| + | [* icon_reminder] Make sure to wash your hands after handling pipe lubricant. |