跳到这一步
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Preparing the 2-inch Pipe for Connection | |
| - | [* red] Ask the |
| + | [* red] Ask the machine shop to make a lengthwise slit on either side of the 2-inch pipe from the end without the pipe bushing to about 1 inch above the 2.5 foot mark(this 1 inch gap is shown in the 2nd image). These slits will make it easier to slide the 1.5 in pipe in and out |