跳到这一步
由 Ian Thompson — 编辑
编辑已通过 由 Craig Lloyd
- 之前
- 之后
- 不变
步骤行
| [title] Terminal Blocks #4 and #5 | |
| [* red] Obtain 6 inches of 24-gauge red wire and strip both ends. | |
| - | [* orange] Screw one end of this wire into the fourth slot(VIN) in terminal block |
| - | [* yellow] Screw in the other end into the fourth slot in terminal block |
| + | [* orange] Screw one end of this wire into the fourth slot(VIN) in terminal block #3. |
| + | [* yellow] Screw in the other end into the fourth slot in terminal block #2. |