跳到步骤＃20
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Terminal Block #4 | |
| - | [* red] Obtain a 4-wire terminal block and Pololu 12V step-up voltage regulator |
| + | [* red] Obtain a 4-wire terminal block and Pololu 12V step-up voltage regulator. |
| [* orange] Attach the voltage regulator to terminal block #4. Make sure the "v-out" has an extra terminal next to it. You will need to connect two wires to "v-out" later. Then solder them together. | |
| - | [* blue] Next solder a small wire to connect the two |
| + | [* blue] Next solder a small wire to connect the two terminals of "v-out". |