跳到这一步
由 Brooke Mason — 编辑
编辑已通过 由 Brooke Mason
- 之前
- 之后
- 不变
步骤行
| [title] Terminal Blocks #2 and #3 | |
| - | [* icon_note] Note: These 5-wire terminal blocks are connected to the soil moisture sensor |
| - | [* icon_reminder] Remember to thread the soil moisture sensor through the smaller of the two holes in the node enclosure before inserting the wires into the terminal blocks |
| - | [* red] Screw in the silver ground wire into the 5th slot of terminal block #2 |
| - | [* orange] Screw in the orange data wire into the first slot of terminal block #3 |
| + | [* icon_note] Terminal blocks #2 and #3 are for the soil moisture sensor. |
| + | [* red] Screw in the silver ground wire into the 5th slot of terminal block #2. |
| + | [* orange] Screw in the orange data wire into the first slot of terminal block #3. |