跳到步骤＃12
由 Ian Thompson — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| [title] Stripping Pressure Transducer Wires | |
| + | [* icon_reminder] We will be getting trained by the machine shop on how to perform this step soon |
| [* red] Use the coax cable cutters to remove about 3 inches of the thick black covering. | |
| [* icon_caution] Be careful not to break or cut the other wires (the silver wire is especially fragile)! | |
| [* orange] Use pliers to twist/pry off the black cable(doing it in two segments may help, for a total of about 3 inches (the yellow marker). | |
| [* icon_note] The blue wire and plastic strips can be cut off. | |
| [* green] Fold the silver wire over on itself and twist it to make it less fragile. | |
| [* light_blue] Use wire cutters to cut the red and black wires to be about the same length as the now-folded silver wire, and use wire strippers to strip about 1/2 inch off of the black and red wires. |