GI Node with Pressure Transducer Assembly 步骤 #12 历史记录

	[title] Stripping Pressure Transducer Wires
-	[* red] Use the coax cable cutters to remove about 3 inches of the thick black covering
+	[* red] Use the coax cable cutters to remove about 3 inches of the thick black covering.
	[* icon_caution] Be careful not to break or cut the other wires (the silver wire is especially fragile)!
-	[* orange] Use pliers to twist/pry off the black cable(doing it in two segments may help, for a total of about 3 inches(the yellow marker)
-	[* icon_note] The blue wire and plastic strips can be cut off
-	[* green] Fold the silver wire over on itself and twist it to make it less fragile
-	[* light_blue] Use wire cutters to cut the red and black wires to be about the same length as the now-folded silver wire, and use wire strippers to strip about 1/2 in off of the black and red wires
+	[* orange] Use pliers to twist/pry off the black cable(doing it in two segments may help, for a total of about 3 inches (the yellow marker).
+	[* icon_note] The blue wire and plastic strips can be cut off.
+	[* green] Fold the silver wire over on itself and twist it to make it less fragile.
+	[* light_blue] Use wire cutters to cut the red and black wires to be about the same length as the now-folded silver wire, and use wire strippers to strip about 1/2 inch off of the black and red wires.