跳到步骤＃4
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
步骤行
| [title] Obtain Enclosure | |
| [* red] The enclosure should have the standard node holes for the solar gland and solar panel attachment | |
| [* orange] The large hole is a 2-inch diameter hole. This is larger than the standard node enclosure | |
| - | [* yellow] Insert |
| + | [* yellow] Insert the pipe fitting with the water resistant o ring on the outside, screwing on the metal ring on the inside |
| [* icon_note] Note: The following steps (8 through 19) will be the same as several steps from the Open-Storm Node Enclosure Assembly with Depth Sensor ifixit guide |