跳到步骤＃3
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
步骤行
| [title] Preparing the Pipes for Connection | |
| [* red] Make a 1 in mark from the other end of the wider pipe | |
| [* orange] Mark holes every 6 inches from this mark(this should yield 6 marks) | |
| - | [* yellow] Put the pipe fitting onto the thinner pipe, and coat the thin pipe with lubricant. |
| + | [* yellow] Put the pipe fitting onto the thinner pipe(along with an O-ring), and coat the thin pipe with lubricant. |
| [* green] Put the thin pipe(cut from step 1) into the wide pipe. |