跳到这一步
由 Charlotte Pratt — 编辑
编辑已通过 由 Charlotte Pratt
- 之前
- 之后
- 不变
步骤行
| + | [title] Making the Pipe Slits |
|---|---|
| + | [* red] Using the table saw, make slits on either side of the pipe for each set of triplet lines marked 1.5 in apart |
| + | [* orange] Leave at least an inch of space between the slits for stability |
| + | [* black] Tips: Wear masks(PVC pipe) and safety glasses while sawing. When sawing the slits close to the bottom, the pipe won't fit in the table saw, so use the handsaw. Also, use the laser to help position the slits evenly |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加