跳到步骤＃1
由 Tanmayi Ambati — 编辑
编辑已通过 由 Tanmayi Ambati
- 之前
- 之后
- 不变
步骤行
| + | [* red] Remove two #00 Philip screw located on the right side beneath the front panel |
|---|---|
| + | [* orange] Use the black spudger to unclip the ribbon and then remove it using the nylon tipped tweezers |
| + | [* yellow] Remove two #00 Philip screws located on the left side panel with the microphone connection |
| + | [* black] Once its unclipped, remove the side panel. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加