跳到步骤＃2
由 Tanmayi Ambati — 编辑
编辑已通过 由 Tanmayi Ambati
- 之前
- 之后
- 不变
步骤行
| - | [* red] Remove one 2mm #00 Philips head |
|---|---|
| + | [* red] Remove one 2mm #00 Philips head screw from the bottom of the camera frame. This will free the lens and motherboard from the frame. |
| [* icon_caution] Be careful not to completely remove the metal frame, there is still a small wire ribbon attached. | |
| [* orange] Gently separate the metal frame from the lens assembly just enough to reach the wire ribbon on the front side of the camera. | |
| [* orange] Use the rubber tipped tweezers to unplug the wire ribbon. | |
| [* black] Remove the metal frame and slide the lens motor assembly out of the plastic frame. |