跳到步骤＃2
由 Umar Getagazov — 编辑
编辑已通过 由 Carsten Frauenheim
- 之前
- 之后
- 不变
步骤行
| [* black] Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible. | |
| [* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed. | |
| [* black] Lift the rear glass with the suction cup to create a gap between the glass and the frame. | |
| [* black] Insert an opening pick into the gap. | |
| + | [* icon_caution] Do not attempt to insert the pick between the glass and the frame without creating a gap first. The glass itself is transparent and is covered with foil from the inside. By not creating a gap, you risk inserting the pick between the glass and the foil instead, which permanently damages the foil and ruins the solid color of the back panel. |
| [* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating. |