跳到步骤＃2
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| - | [* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed. |
|---|---|
| - | [* black] Apply a suction handle onto the lower part of the rear glass. |
| - | [* black] Lift the rear glass to create a gap and insert an opening pick. |
| + | [* black] Secure a suction handle to the lower edge of the rear glass, as close to the edge as possible. |
| + | [* icon_note] If the phone's rear glass is cracked, the suction cup may not stick. Try [https://d3nevzfk7ii3be.cloudfront.net/igi/4MmKE22Cy2MavVZU|lifting it with strong tape|new_window=true], or superglue the suction cup in place and allow it to cure so you can proceed. |
| + | [* black] Lift the rear glass with the suction cup to create a gap between the glass and the frame. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* icon_note] If you have trouble, apply more heat to further soften the adhesive. Follow the iOpener instructions to avoid overheating. |