跳到步骤＃21
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] Leave the pick from the last step in place to prevent the adhesive from re-sealing. |
|---|---|
| + | [* black] With a new pick, slice gently over the left-hand antenna, stopping before the home button. |
| + | [* icon_caution] Only slide the pick from the outer edge toward the center of the iPad. Do not move the pick back toward the outer edge, as moving in this direction may damage the antenna. |
| + | [* icon_note] If you need to slide the pick over the lower section more than once, remove it and re-insert at the outer edge, and slide inwards. |
| + | [* black] Leave the pick in place before moving on. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加