跳到步骤＃20
由 Adam O'Camb — 编辑
编辑已通过 由 Adam O'Camb
- 之前
- 之后
- 不变
步骤行
| + | [* black] Slide the lower left pick to the lower left corner to cut the adhesive on that corner. |
|---|---|
| + | [* black] Leave the pick at the corner. Do not pry any farther, and do not remove the pick from the iPad. |
| + | [* icon_note] There are quite a few things to avoid beneath the lower bezel, so study the third image closely: |
| + | [* red] Antennas |
| + | [* orange] Home button cavity |
| + | [* yellow] Digitizer cable |
| + | [* black] The following steps will direct you where to pry to avoid damage to these components. Only apply heat and pry where directed. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加