Huawei Honor 10 Rear Glass Removal 步骤 #5 历史记录

-	[* icon_note] ~~Falls du Schwierigkeiten beim Schneiden des Klebstoffs hast~~, ~~dann lege den erwärmten iOpener eine Minute lang erneut auf~~.
-	[* black] ~~Setze einen vierten iFixit Opening Pick ein~~.
-	[* black] ~~Schiebe den iFixit Opening Pick in die rechte obere Ecke,~~ ~~damit der Klebstoff nicht wieder versiegelt wird~~.
+	[* icon_note] [guide\|25705\|Apply more heat] if the adhesive becomes hard to cut. During the removal process, the back cover is under tension all the time and is likely to break if the adhesive isn't softened enough.
+	[* black] Insert a fourth opening pick at the top left corner of the rear glass.
+	[* black] Slide the opening along the top edge of the rear glass and cut the remaining adhesive with it.