跳到步骤＃3
由 Dominik Schnabelrauch — 编辑
编辑已通过 由 Dominik Schnabelrauch
- 之前
- 之后
- 不变
步骤行
| + | [* icon_note] [guide|25705|Apply more heat] if the adhesive becomes hard to cut. During the removal process, the back cover is under tension all the time and is likely to break if the adhesive isn't softened enough. |
|---|---|
| [* black] Insert a second opening pick at the bottom right corner of the rear glass. | |
| [* black] Slide the opening pick along the bottom edge of the rear glass to cut the adhesive and leave it in the bottom left corner. |