跳到步骤＃1
由 Justin Ogihara — 编辑
编辑已通过 由 Justin Ogihara
- 之前
- 之后
- 不变
步骤行
| - | [* |
|---|---|
| + | [* red] Detach the small wires connected to the card by lifting the ends straight upward. The wires are held in place by friction and should pop right off. |
| [* icon_note] ''These wires should be handled carefully since they're the Wi-Fi and Bluetooth antennas.'' | |
| [* icon_note] ''Take note of which wire goes where, as mixing these cables will cause both Wi-Fi and Bluetooth to stop working.'' |