跳转到主内容

跳到步骤#2

Ethan Guillotte编辑

编辑已通过 由 Ethan Guillotte

之前
之后
不变

步骤行

-[* black] Next, pull the plastic tab located between the two screws and pull lightly upwards.
-[* black] Finally, pull the same tab horizontally, removing the hard drive from the laptop. You should see the hard drive slide out from the connectors on the motherboard as shown in the image.
+[* black] First, locate the plastic tab found in between the two screws from step one.
+[* black] Next, pull the tab upwards and away from the laptop. This will disconnect the hard drive from it's connectors on the motherboard as shown in the image.