跳到步骤＃1
由 Ethan Guillotte — 编辑
编辑已通过 由 Ethan Guillotte
- 之前
- 之后
- 不变
步骤行
| - | [* black] Using a Phillips head screwdriver (PH1), unscrew the two screws at the base of the hard drive as outlined by the image. |
|---|---|
| - | [* black] Next, pull the plastic tab located between the two screws and pull lightly upwards. |
| - | [* black] Finally, pull the same tab horizontally, removing the hard drive from the laptop. You should see the hard drive slide out from the connectors on the motherboard as shown in the image. |
| + | [* black] Using a your Phillip's head screwdriver, unscrew the two screws at the base of the hard drive as outlined by the image. |
| + | [* black] Set the two screws aside in a safe spot. |