跳到步骤＃1
由 Kaitlyn Johnson — 编辑
编辑已通过 由 Kaitlyn Johnson
- 之前
- 之后
- 不变
步骤行
| [* black] Begin by disconnecting the back panel from the keyboard bezel | |
| [* black] To do this remove all screws on the back panel | |
| [* black] Use the T4 bit to remove screws (bits are magnetics) | |
| - | [* icon_note] |
| + | [* icon_note] T5 or T6 for possible stripped screws |