跳到步骤＃4
由 Marty Rippens — 编辑
编辑已通过 由 Marty Rippens
- 之前
- 之后
- 不变
步骤行
| - | [* icon_note] The cover is attached multiple cables. Be careful not to lift the cover too far so you do not damage these cables. |
|---|---|
| + | [* icon_note] The cover is attached by multiple cables. Be careful not to lift the cover too far so you do not damage these cables. |
| [* red] Using tweezers, unplug the three cables attached to the keyboard. To do so you will find where the wires end (the three red marks). The next step is to use tweezers or your fingers to pinch the plastic piece holding the wires, and gently pull the piece out. After that it should disconnect. | |
| - | [* black] Remove the plastic keyboard cover |
| + | [* black] Remove the plastic keyboard cover. |