跳到步骤＃9
由 Spencer Warren — 编辑
编辑已通过 由 Spencer Warren
- 之前
- 之后
- 不变
步骤行
| + | [title] Remove rubber vibartion dampeners |
|---|---|
| + | [* black] In the picture, the drive and board are on their side. on the bottom is a screw covered with a rubber vibration dampener. the top shows the other of the two on this side without the rubber. |
| + | [* black] The rubber is not glued on, so it is very easy to remove. There are two on each side of the drive for a total of four. Remove them all. |
图片1
没有之前的图片
已添加