跳到步骤＃1
由 Spencer Warren — 编辑
编辑已通过 由 Spencer Warren
- 之前
- 之后
- 不变
步骤行
| + | [title] Overview |
|---|---|
| + | [* black] Above you will find a picture of the fully disassembled casing on the outside of the bay, (the board inside is not shown). The entire case is held togeter with snaps. These ones are particularly nasty and I found I could only prevent a few from breaking when opening the case even when using the gutar picks from the ifixit pro tech toolkit |
图片1
没有之前的图片
已添加