| - | [* black] The screen is connected to the plastic domed back with holes. There are two screws at the back of the base of this domed panel. Remove screws to remove screen. |
|---|
| - | [* icon_note] Set screen panel aside for safe keeping. |
|---|
| - | [* icon_reminder] More to see and modify... |
|---|
| + | [* black] Disconnect the speaker from the jumper on the circuit board. |
|---|
| + | [* icon_caution] If your model has an FM radio, there will be also be a fragile antenna wire soldered on the circuit board. To be careful, you may wish to remove the screw that pins the antenna to the back cover and give the wire more slack. |
|---|
| + | [* black] At the base of the domed panel with holes there are two screws. Remove them to release the screen. |
|---|
| + | [* icon_note] Set screen panel aside for safe keeping. |
|---|