跳到步骤＃1
步骤行
| [* black] Press and slide the access brush roll buttons towards the "Access Brush Roll" printing on casing. | |
| [* black] Lift plastic casing upward and off of the top of the floor unit. Place off to the side. | |
| [* black] Pull the red Pull tab that is located on the right side of the soft brush roll away from the front of the vacuum and place the soft brush roll to the side. | |
| - | [* black] To replace soft brush roll, place the end without the pull tab into the slot where you pulled out the brush roll. |
| - | [* black] Insert the other end with the pull tab back into the side where you removed it from, and make sure the soft brush roll is firmly seated into the holder. |
| - | [* black] Replace the clear top cover on the unit and close the lid. |