跳到步骤＃1
由 Teena Carnegie — 编辑
编辑已通过 由 Teena Carnegie
- 之前
- 之后
- 不变
步骤行
| [* black] Remove all wires and ribbon cables attached to the motherboard. | |
| [* black] Some Wires have small black tabs on top of them. Meaning one must grab the tab and pull directly upward, gently. | |
| [* black] Some ribbon cables may require the blue opening tool to release the cable's connectors before pulling it out. | |
| - | [* black] Finally, some cables have a plastic head with small notches on the side. |
| + | [* black] Finally, some cables have a plastic head with small notches on the side. Use your hand to gently wiggle this cable side to side to remove. |
| [* icon_caution] The blue opening tool is recommended to avoid damaging the cables. | |
| [* icon_note] There should be a total of 8 wires/cables that must be removed from the motherboard. |