跳到步骤#1
由 Lennert Dixson — 编辑
编辑已通过 由 Lennert Dixson
- 之前
- 之后
- 不变
步骤行
+ | [* black] Remove all wires and ribbon cables attached to the motherboard. |
---|---|
+ | [* black] Some Wires have small black tabs on top of them. Meaning one must grab the tab and pull directly upward, gently. |
+ | [* black] Some ribbon cables may require the blue opening tool to release the cable's connectors before pulling it out. |
+ | [* black] Finally, some cables have a plastic head with small notches on the side. One must use their hand to gently wiggle this cable side to side to remove. |
+ | [* icon_caution] The blue opening tool is recommended to avoid damaging the cables. |
+ | [* icon_note] There should be a total of 8 wires/cables that must be removed from the motherboard. |
图片1
没有之前的图片
已添加
图片2
没有之前的图片
已添加
图片3
没有之前的图片
已添加